| Super glossy mirror surface. The .015" is our thinnest sheet, mainly used as a veneer layer over another material in order to give a silver carbon fiber appearance. The material is actually not carbon fiber, but rather an engineered high quality fiberglass fabric made by Hexcel with an extremely thin layer of aluminum coating. This sheet can be used in many other applications. The .015" thickness can go around a minimum of 3/4" radius curve and can be flexed in two dimensional directions and very slight convex areas only. Since this is a real Hexcel Texalium sheet it can not be bent, molded or shaped with or without heat.
Option: You can also choose to add 3M 468MP industrial adhesive backing for easy peel and stick application.
Tools Required: This sheet is easily cut with scissors or hobby knife. Mark on sheet with a Sharpie marker, marks can be removed with acetone. You can also apply masking tape over areas and mark on that, remove after cutting. Edges can be easily sanded, we recommend wet sanding with maximum 80 grit. |
I couldn't find this anywhere else 
