| Super glossy mirror surface. The .059" is our heavier duty sheet for structural applications. The .059" can NOT be flexed around any curves. Since this is a real carbon fiber sheet it can not be bent, molded or shaped with or without heat.
Option: You can also choose to add 3M 468MP industrial adhesive backing for easy peel and stick application.
Tools Required: This sheet can be cut with a Dremel type rotary tool or electric jig, band or table saw. Mark on sheet with a Sharpie marker, marks can be removed with acetone. You can also apply masking tape over areas and mark on that, remove after cutting. Edges can be easily sanded, we recommend wet sanding with maximum 80 grit. |
