| 2.2mm / .082" carbon fiber sheet made specifically for R/C use. The sheet is double sided smooth and glossy, heavy duty rigid sheet. The sheet was made using T300 carbon fabric. This is an ideal inexpensive smaller sheet for your custom R/C parts.
Tools Required: This sheet can be cut with a Dremel type rotary tool or electric jig, band or table saw. Mark on sheet with a Sharpie marker, marks can be removed with acetone. You can also apply masking tape over areas and mark on that, remove after cutting. Edges can be easily sanded, we recommend wet sanding with maximum 80 grit. |
