| Carbon fiber angle at 90 degrees. Our angle has a radius corner for extra strength. Thickness is .065". The finish is smooth and matte. A great structural product it has been used on a wide variety of applications.
This angle can be easily attached using a variety of fasteners or even better, bonded using structural adhesives available from most home stores. We recommend a light sanding and acetone cleaning where adhesive will be applied.
Tools Required: This angle can be cut with a Dremel type rotary tool or electric jig, band or table saw. Mark on sheet with a Sharpie marker, marks can be removed with acetone. You can also apply masking tape over areas and mark on that, remove after cutting. Edges can be easily sanded, we recommend wet sanding with maximum 80 grit. |
